Monitor
and Control Panel
MCP-500-MC Click on the screen image to
view all screen shots and system details
|
|
|
The MCP-500-MC is our top of the line standard touch screen system. It uses our
bright TFT color LCD touch screen and includes programming to monitor and control all of the features shown in the
diagram above.
All sensors and control interfaces are sold separately allowing system flexibility.
Click on the image for details on the system and all screens included.
|
|
Monitor and Control Panel MCP-500-M Click on the screen image to view all screen
shots and system details
|
|
|
The MCP-500-RV includes all of the features of the MCP-500-RVC but
uses a less costly blue and white LCD screen.
All sensors and control interfaces are sold separately allowing system flexibility.
Click on the image for details on the system and all screens included.
|
|
Monitor and Control Panel MCP-200-M Click on the screen image to view all
screen shots and system details
|
|
|
The 6" touch screen panel with processor, input modules and program installed. Sreens
installed include- Tank Levels, AC Power Monitor, DC Power Monitor, Temperature and Alarms Monitor. Click on
image for view of all screens and details.
|
|
GSM
Text Message Modem
GSM-LINK Click on image to enlarge
|
|
|
GSM-LINK is a wireless GSM modem that when added to our MCP-200 or MCP-500 systems will
send text messages when alarm conditions occur. Text messages can include Loss of AC power, Low DC Voltage, High
or Low tempertaures, Generator running, etc.
|
|
Smart Automatic Transfer Switch
SATS-50 Click on image to enlarge
|
|
|
The SATS-50 is a 50 amp automatic transfer switch that can be used with our MCP-500
Monitor and Control Systems. The SATS-50 is controlled by the MCP-500 and utilizes time delays
to transfer to eliminate transients and damage caused by transfering to out of phase stored energy or shore power source.
|
|
Smart Automatic Transfer Switch
SATS-50/50/100 Click on image for details
|
|
|
The SATS-50/50/100 is a three source automatic transfer switch that can be used with our
MCP-500 Monitor and Control Systems. The SATS-50/50/100 is controlled by programming in
our MCP-500 and utilizes time delays to transfer to eliminate transients and damage caused by transfering to
out of phase stored energy or shore power source. The SATS-50/50/100 with automatically transfer between
three independent sources, (1) 100amp source and (2) 50 amp sources and most often used in applications using (2)
generators and (1) shore power source.
For a technical description of why our transfer switch and generator control is better
please click on the image.
|
|