RV MONITOR AND CONTROLS, TANK LEVELS, AC ,DC, GENERATOR

The MCP-500-RV is the heart of the monitor and control system. It has a 6' LCD touch screen that allows you to switch from one screen to another with a simple touch of a box displayed on the screen. All of the screens below are included in this model.

Features included in the MCP-500-RV

Tank level monitoring of fresh, grey and black water tanks as well as propane tank level. Alarm levels can be set for each tank.

AC voltage and current monitoring with alarm set points for low voltage and high load current.

DC voltage monitoring of engine and house batteries and current monitoring of the house batteries. Alarm set points are included for low battery voltages.

Temperature monitoring of outside, inside and the basement with alarms when the inside or basement temperatures fall below freezing. Provisions for back-up heat activation is also provided.

Automatic control of the generator when loss of AC power and/or low DC house voltage occur. The generator must be equipped with automatic shut down controls and use momentary glow, start, and stop switching for this feature to be used.

Automatic load shedding of one non-essential load on each of line 1 and line 2 when the load current exceeds 50 amps. The loads are automatically re-applied once the load current is at an acceptable level.

The MCP-500-RV can be installed complete with all of the sensing interfaces from the beginning or added to in the future.

Tank Level Screen
Click on image to enlarge

Tank level screen with full scale analog display of fresh, grey and black water and propane level. Alarm points are set in the program for low fresh water and propane as well as high grey and black water. When an alarm condition occurs the program changes to the alarm screen and the beeper sounds for ten seconds.

AC Power Monitor Screen
Click on image to enlarge

The AC power monitor screen monitors voltage and current in both L1 and L2 legs. The program has alarm set points for low voltage and high current. When an alarm condition occurs the screen changes to the alarm screen and a beeper sounds for ten seconds.

DC Power Monitor Screen
Click on image to enlarge

The DC power monitor page displays house and engine battery voltages and house battery load current. Alarms are set in the program at low DC voltages of both batteries. When an Alarm condition occurs the screen automatically changes to the alarm screen and a beeper sounds for ten seconds.

Temperature Monitor Screen
Click on image to enlarge

The temperature monitor screen displays temperatures at three locations. For a motorhome it would monitor inside, outside and basement temps. The program has alarm set points for inside and basement temps at 32 deg. When an alarm condition occurs the screen changes to the alarm screen and the beeper sounds for ten seconds.

Alarm Panel
Click on image to enlarge

The Alarm Panel automatically displays when an alarm condition is first sensed by the processor. A beeper will sound for ten seconds to notify of a new alarm condition. After ten seconds the alarm gets placed in the alarm annunciator field until the alarm condition is cleared. The silence alarm button can be activated at any time to silence the beeper.

Control Panel Screen
Click on image to enlarge

The Control Panel Screen is used to activate the control functions of the MCP-500-RV. The generator can be set to be controlled automatically with loss of AC power and/or low house battery voltage. The load shedding feature can be activated to shed non-essential load if the load current is too high and a back-up heat source can be activated if the temperature falls below freezing.

The dimensional information provided above show cutout size and space required behind the unit. Please call or email for additional information.